Construction tools

 
Founded in 1998 - Deli Tools
Email:zhwpa@hotmail.com
TEL:+86-316-7902525
No.QY010 Name:Powered winch

Application: Powered winches are the construction tools of erecting electric circuits of high pressure electric transmission in the sky and laying eletrical cables underground. They can complete the tasks of heavy-lifting and dragging such as erecting the wire. Testified by the experiments and practical uses, they have reasonable structure, small volume, light weight, strong power, nimble operation and convient transporting. Based on so many advantages, this two models of Powered winch are popular with the electric workers

Cat. No.

QY010-3

QY010-5

Model

JMC-3

JMC-5

Engine

170F

R180

Engine Power (Hp)

3.8

8

Rotation Speed(rpm)

2600

2600

Pull (kN)/ linespeed (m/min)

I

15/15

I

28/18

30/8

50/9

Reverse I

15/13.6

Reverse I

28/16

Reverse II

30/7

Reverse II

50/8

Dimensions  (mm)

1200×650×700

1350×750×700

Weight(Kg)

120

165

Brake
there are two kinds of brake installment in the machine-the auto clamp-brake and the clutch-drived chain brake.Both of them can play the brake function in clockwise and reverse-clockwise directions.|
Hand installment
if the prime motor doesn’t work well during the working process, you can use the hand installment to help you complete the job.
Lubrication
using the gasoline to lubricate the gearbox and using the butter to lubricate the outside bearing.
Operation methods
1:before turning on the machine,you must turn on the clutch first and put the racker for crosspiece-changingin the zero position
2:when moving the crosspiece,you should be quick.Otherwise the brake won’t work well.when turning on the machine,you shouldn’t work too fiercly
3:when changing the crosspiece position,you must turn on the clutch.Otherwise the gear will be damaged.After that,you should check whether the changing job is well done.Make sure you haven’t changed two crosspieces in one time.
4:If there is any difficulty during the process of changing crosspiece position,you shouldn’t try to complete the job forcrfully.Instead you should use the hand installment to help you complete the job.Concrete procedure:using the spanner to move the hand installment to a position with a certain angle,then you can change the crosspiece position smoothly.

Cable Drum Trailer

Cable Drum Jacks

Cable Roller
Raising Sheerlegs

Pulling Grips

Cutting tools
Hydraulic cable cutter

Cable Preparation Tools

Hydraulic crimping tools

Wire grip

Ratchet Pullers

Brass cutter & bender

Trenchless tools

Other tools

Safety protection

Pole Fiberglass Hot Stick
Grounding Equipment
Fall Protection
Traffoc safety supplies
Other tools

Lifting tools

Chain Block
Lever blocks
Contact information
TEL:+86-316-7902525
FAX:+86-316-7869922
zhwpa@hotmail.com

Declaration:Copyright Deli Tools. All rights reserved
No part of this website may be copied in any way or by any means without the prior written permission of the publisher.