Construction tools

 
Founded in 1998 - Deli Tools
The factory is China's largest producer of Duct Rodder¡£We produce Duct Rodder has 12 years of history, we have the advanced production equipment and production technology. Our Duct Rodder are exported to more than 60 countries £¬and many Asia countries has agency.
The factory is China's largest producer of Duct Rodder¡£We produce Duct Rodder has 12 years of history, we have the advanced production equipment and production technology. Our Duct Rodder are exported to more than 60 countries £¬and many Asia countries have agency.
Fiberglass duct rodder

Duct Rodders are composed of fiber glass rod which was extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer, which make duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, which make them safe for use in cable occupied duct.
High Density polyethylene (Grade: for the insulating and jacketing of Telecommunication Cables) is used in the outer diameter coating.
Duct Rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving.

Features and Benefits£º
1-Light weight, durable, resistance to acid, alkali, aging resistant, corrosion resistant.
2-High tensile strength and bending properties, which make it to go through narrow pipes easily.
3-Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. Its usability will not be affected by temperature.
4-Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability.
5-Cover was coated with long-term UV-resistant polyethylene.
6-Its surface has the advantage of smooth, wear-resistant and long service life.
7-There are meter marks on the protect layer of duct rodder, which can be used for measuring distance. Marks are printed by professional printing machine, which has the advantage of strong adhesion, clear writing, waterproof, anti-ultraviolet, it can be still clear even after using many times.
8-There are several kinds of colors for the rod for your chosen.
Technical Data of Duct Rodders

1.Glass Reinforced Composite core:
General properties

Property
Value
Keinforcement
E-Glass Fiber
Glass Content of Inner Part
75-80%
Material of Pulling Rod
Epoxy fiber glass (inner) High density Polyethylene(outer)
Density
£¾1.9 gr/cm3
Diameter Tolerance
¡À 0.10mm
Work situation temperature
- 400¡æ to +800¡æ
Mechanical properties
Property
Value
Minimum pulling strength
4000 N¡À5%
Tensile Modulus
£¾46.500Mpa
Consistency of rod
137 gr/m
Flexural Modulus
>46.500 Mpa
Elongation at Break
2.5-3%
Min. Bending Radius
388mm
2. Polyethylene cover
Material:Medium Density Polyethylene Resin for the insulating and jacketing of Telecommunication Cables.
Property
Value
Tensile Strength
£¾15N/mm2
Environmental Stress & crack resistance
>1000 hr.
Heat Stability
OK.
Carbon Black
OK.
Frame specification and feature
1- Welded by high-quality steel, sturdy and durable, with good compression resistance capacity and proper structure, is able to keep its shape under the pressure of 8KN.
2-Smooth and uniform welding, firm solder joints, no incomplete and lack of welding, no welding slag, the whole frame will be polished after welding.
3-Equipped with brake device, the rotating or stopping of cable reel can be easily realised just by turnning handle.
4-Tilting type handle, which is convenient for pushing and pulling. When you need to move the frame, just hold the holder in hand, step on the assistant support bracket which is on the bottom part of the frame, then pull the frame to the direction where your body is, to push the frame. Using the wheels on the bottom of the frame for supporting, to make the moving easily.
5-There is a roller and a ring on the top side and bottom side of the frame respectively, both of them are used for the convenience of duct rodder going through, and protect the protect cover from being scratched.
6-Frame wheels are steel wheels, which were covered with high-quality rubber, it has the advantage of free from air charging, wearable, non-slip,etc.. Wheels have bearings on them to ensure them turn properly.
7-The surface cover of frame is high-temperature sprayed plastic, using outdoor spray material, which has the advantage of touch smooth, non-fading, non-shedding, and good corrosion resistance performance.
8-There is rain-proof cover on the outside of the frame, which is for the convenience of duct rodder storage. It is water-resistant, anti-ultraviolet radiation, and can play a good protective role on duct rodders.
Duct rodder accessories
NO.CKP0101
Threaded Rod End Fitting:
A male rod end fitting is supplied as standard with mini, midi and maxi rods. Replacement threaded rod end fittings allow the connection to other duct rod accessories, such as tapered rod ends, flexible guide ends, roller guides etc
NO.CKP0102
Pulling Eyes:
Pulling Eyes are used for tying wire or pull tape to the end of the rod or used as a leader. They will screw directly onto the Rod End supplied with the rodde

NO.CKP0103
Splice Connectors:
These products are used to repair a break in the rod. Having a solid section in the middle of the rod may cause problems with bending at that point and care should be taken when winding rod with a solid connector. Three larger sizes are Stainless Steel and can be glued or screwed on , the smaller sizes are brass.

NO.CKP0104
Roller Guides:
The Roller Guide is used to push through conduit with cable already in place. The rollers prevent the rod from wedging in under the cable as they rotate on hardened shoulder bolts. The shank attaches directly to the Swivel Rod End to provide axial rotation

NO.CKP0105
Flexible Guide Heads:
Flexible Guides are used for leading the rod around tight bends. The three larger sizes are Stainless Steel and Aluminum, the smaller sizes are Brass.

NO.CKP0106
Rod Grapple:
An excellent tool for rodding duct, especially for long runs when working from either end.
Two loops on one half and four hooks on the other half lock together when they meet in the conduit
The connecting ends of each half is outfitted with
3/4 in.-10NC threads for easy attaching to our Hickory or
Fiberglass Duct Rods
Use the loop section of the Rod Grapple as a leader on the first rod, and push the rod into the duct. Then screw or attach additional rods to the last one in the duct and push them into the duct. Repeat this operation until the leader appears in the next manhole.
specification table ( We can have the products made to your order,if you require special specification.)
Product No
Length
Weight
frame diameter mm
Length mm
Width mm
Height mm
Mini Rod 4.5mm
400
400
162
520
DL4530
30m
4.5Kg
       
DL4550
50m
4.8Kg
       
DL4560
60m
5.0Kg
       
DL4570
70m
5.3Kg
       
DL4580
80m
5.5Kg
       
Midi Rod 6mm
 
600
600
210
730
DL6060
60m
9Kg
       
DL6080
80m
10Kg
       
DL6090
90m
10.5Kg
       
DL60100
100m
11Kg
       
DL60120
120m
11.5Kg
       
DL60150
150m
13Kg
       
Midi Rod 8mm
 
800
850
450
1000
DL6060
60m
29Kg
     
DL6080
80m
31Kg
       
DL60100
100m
33Kg
       
DL60120
120m
35Kg
       
DL60150
150m
38Kg
       
DL60180
180m
41Kg
       
Midi Rod 10mm
         
DL10100
100m
37Kg
1000
1200
470
1350
DL10120
120m
40Kg
       
DL10150
150m
44Kg
       
DL10180
180m
48Kg
       
DL10200
200m
51Kg
       
Midi Rod 11mm
 
1000
1200
470
1350
DL11100
100m
40kg
       
DL11120
120m
43kg
       
DL11150
150m
48kg
       
DL11180
180m
52kg
       
DL11200
200m
55kg
       
DL11250
250m
61kg
       
DL11300
300m
68kg
       
Midi Rod 12mm
 
1000
1200
470
1350
DL12100
100m
43kg
       
DL12120
120m
46kg
       
DL12150
150m
51kg
       
DL12180
180m
55kg
       
DL12200
200m
58kg
       
DL12250
250m
64kg
       
DL12300
300m
73kg
       
Midi Rod 13mm
 
1200
1350
470
1570
DL13150
150m
65kg
       
DL13200
200m
80kg
       
DL13250
250m
93kg
       
DL13300
300m
108kg
       
Midi Rod 14mm
 
1200
1350
470
1570
DL14150
150m
70kg
       
DL14200
200m
84kg
       
DL14250
250m
98kg
       
DL14300
300m
113kg
       
product show
8mm diam Duct Rodder 8mm diam Duct Rodder 11mm diam Duct Rodder
10mm diam Duct Rodder 9mm diam Duct Rodder 12mm diam Duct Rodder
11mm diam Duct Rodder 16mm diam Duct Rodder 13mm diam Duct Rodder

Cable Drum Trailer

Cable Drum Jacks

Cable Rollers
Raising Sheerlegs

Cable Pulling Sock

Cutting tools
Hydraulic cable cutter

Cable Preparation Tools

Hydraulic crimping tools

Wire Grip

Ratchet Pullers

Brass cutter & bender

Trenchless Equipment

Contact information
TEL£º+86-316-7902525
FAX£º+86-316-7869922
zhwpa@hotmail.com

Declaration:Copyright Deli Tools. All rights reserved
No part of this website may be copied in any way or by any means without the prior written permission of the publisher.